While in the Pattern sequencer view. Press and hold one of the Fx keys to show the Fx list. Use the screen button underneath. It will expand their description popup.
- - None, indicates that there is no effect used on the desired step.
! - Off, toggles off the effect used on the previous step.
V - Velocity sets the Velocity of an Instrument from 0% to 100%. When V is not specified, the default velocity set in Instrument Parameters is used.
P - Panning sets the Panning of an Instrument from -50 (L) to +50 (R).
M - Micro-tune sets the micro-tuning adjustments from -99 cents to +99 cents. Works over MIDI output.
G - Glide sets the time it takes for the pitch of the previous note to travel to the pitch of the corresponding note from 0-49% (0-1s) to 50-100% (1-15s).
T - Tempo changes pattern tempo from 10BPM to 400BPM. Handy to create custom swings or grooves. Notice that MIDI Clock output is based on the current tempo. Synchronizing anything over MIDI while using Tempo step Fx will affect the MIDI sync. It supports the full stop command with the STP setting > jog-wheel max to the left.
I - Swing sets the pattern swing from 25% to 75%, where 50% is no swing. Put it on the first or any other step in one of your eight sequences to set a swing effect for the entire pattern. Affects the MIDI clock output.
m - Micro-move slightly moves (nudges) forward the step position from 0% to 100%.
q - Gate Length sets the length of a note if you need it shorter than step length from 0% to 100%. Performs in relation to the Instrument’s sustain parameter. Works over MIDI output.
C - Chance, sets a chance of a step being played from 0% to 100%.
R - Roll sets the type and value of the (step divider) parameter from 0 to 16 for each Roll type. R - regular Roll. Rv - decreasing volume Roll. RV - increasing volume Roll. Rn - decreasing note. Roll RN - increasing note Roll RR - random note Roll. Works over MIDI output.
A - Arp, combined with the Chord step Fx (0xx) to arpeggiate in the given tempo divider, either in raising /, falling , or random R pitches. Works over MIDI output.
n - Random Note, sets the range of randomization for Note with each sequencer pass from +/- 0 to +/- 100. Working accordingly to the global musical scale selected for the pads in Config.
i - Random Instrument, set the range of randomization for Instrument number with each sequencer pass from +/- 0 to +/- 47.
f - Random Fx value, sets the range of randomization for the Fx that is in the same step with each sequencer pass. For example, if the randomizer value is 10 and the affected Fx value is 100, the algorithm will pick the value from 90 to 110 from +/- 0 to +/-255.
v - Random Volume, sets the range of randomization for Velocity with each sequencer pass from +/- 0 to +/- 100.
r - Reverse Sample Playback, changes the sample playback direction. Values: <<< and >>>.
p - Position works in relation to the chosen sample playback type. Changes the position of Sample start, Wavetable position, or Granular position from 0% to 100%.
S - Slice sets the slice number of an instrument with a Slice playback type from 1 to 48.
g - Volume LFO sets the LFO rate for instrument Volume. LFO is synced to project Tempo. With the following values: 6; 4; 3; 2; 3/2; 1; 3/4; 1/2; 3/8; 1/3; 1/4; 316 (3/16); 1/6; 1/8; /12 (1/12); /16 (1/16); /24 (1/24); /32 (1/32); /48 (1/48); /64 (1/64).
h - Panning LFO, Sets the LFO rate for Panning. LFO is synced to project Tempo. Values the same as above.
j - Filter LFO sets the LFO rate for the selected filter type. LFO is synced to project Tempo. Values the same as above.
k - Position LFO sets the LFO rate for the selected playback type (Wavetable, Granular) Position with respect to the project tempo (BPM). Values the same as above.
l - Finetune LFO sets the LFO rate for finetuning value. Values the same as above.
D - Overdrive sets the amount of Overdrive effect from 0% to 100%.
L - Low-pass sets the cutoff amount of the Low-pass Filter from 0% to 100%.
B - Band-pass sets the cutoff amount of the Band-pass Filter from 0% to 100%.
H - High-pass sets the cutoff amount of the High-pass Filter from 0% to 100%.
s - Delay sets the amount of Delay send effect from 0% to 100%.
t - Reverb sets the amount of Reverb to send effect from 0% to 100%.
E - Bit Depth sets the bit depth from 4 bits to 16 bits.
U - Tune sets the tuning adjustments. From -24 semitones to 24 semitones.
F - Slide up sets the slide-up amount in steps of 1/16th semitone from o to 255.
J - Slide down sets the slide-down amount in steps of 1/16th semitone from o to 255.
a - f - MIDI CC or PC, channel aftertouch, or polyphonic aftertouch outputs. Sends MIDI values from 0 to 127. Choose one of the MIDI instruments. And check or edit the available assignments in the Instrument Parameters. Each MIDI channel has its own now. While working on the Patterns, you now need to specify which MIDI channel you want for each of a - f step effects. Choose the MIDI instrument for that step. There are 16 MIDI channels available in the MIDI Instruments from M01 to M16. It’s possible to assign six different CCs to each of those channels.
0 - MIDI Chord sends many MIDI notes. Numbers represent semitones above the base note. Eg. C-4 047 will play a major chord: C-4 (base note), E-4 (base+4), and G-4 (base+7). This is a MIDI exclusive step fx unless used with ARP.