Bug Description
In the performance mode you are able to assign eg. synth 1, Macro 1 to FX slot 1. Via the 4 presets values (+±- knobs) this works as expected and the macro is applied according to the values set. But when assigning external midi control to this slot (CC51) I see the value changing in the top row, but the sound is not affected?
Though Midi CC input is changing sound when other FX or sample based parameters are selected in the slots. So my guess is that all slots set to S1-3 ~ Macro 1-6 / S1-3 ~ Delay Send / S1-3 ~ Reverb Send, are not working as intended?
Steps to Reproduce
- I have connected the Mini with a Novation Launch key mini 25 Mk4 via Midi Jack
- Make sure your midi controller is sending CC messages on CC51 (rotary knob)
- Make sure the Mini is receiving Midi CC - All channels
- Create a pattern with some random synth notes eg. Synth 1 - WTFM - Init Patch
- In Synth 01 macro page, make sure there is an audible change when increasing eg the value of Macro 1, in my case M1 Attack
- Go to the Performance FX page edit eg. slot 1 and select S1 macro 1.
- When midi is setup correctly, turning the corresponding knob for slot 1 (CC51) will change the effect value in the top row of the slot.
- Sound should also change in the same way it should do when performing step 5, but it won’t
- If you edit the slot and add values to one or more of the 4 preset buttons (+±-) the macro is applied and affecting the sound accordingly when using these buttons.
To summarize Synth FX don’t seem to change when dialing a value via Midi CC, I’m sure my midi setup is correct, because sound is affected via Midi CC51 when selecting eg. a sample based FX like Volume/Velocity in the first FX slot
FX affected;
S1-3 ~ Macro 1-6 / S1-3 ~ Delay Send / S1-3 ~ Reverb Send
p.s: I used CC51 / FX Slot 1 for the reproduction, but this applies to all FX slots and corresponding Midi CC values (51~62)
Occurrence / Frequency
Always
Found in Firmware
- Version: 2.2.1
- Build: 1518
Attachments
--