Bug Description
I experience that Midi note off from external is not captured anymore after updating to 1.0.2, which means that I cannot use Tracker Plus as my main sequencer currently as I like to play my notes live from my fav midi keyboard.
Reproduction Steps
Go to record mode
Hit some notes…
Only the note, but without the note-off, so the note will then just be hanging.
Occurrence
bug is reproducible always
Found in
go to Config > Firmware page on your device and copy version / build numbers below
Version : 1.0.2
Build : [example 345]
Attachments
Hey @gravedraq looks like you are experiencing this?
Bug Description
When General → Recording Options is set to Only Notes the OFF message is not placed when releasing the pads (or only sometimes). This causes follow up notes to be placed in the next adjacent columns.
This affects all the instrument types (Samples, Synths & MIDI)
Correct behaviour would be that when you release a pad, that OFF message is placed.
Workaround for now:
You can circumvent this behaviour by enabling Microtiming.
Then the OFF messages are place…
If so, i’ll merge your bug report with the existing one. Let me know
Could be, I did some further test.
Test one - roll from 1.0.2 and back to 1.0.1:
Test two - roll from 1.0.1 and back to 1.0.2:
yeah this seems to be the same issue. I have tested it with the pads and with an external controller. the behaviour is the same.
Could you do me a favor and post your videos in the other bug report (as it has already been logged)?
This way we have all the information in one place. And then we’ll close this one down.
By the way - there is a workaround for now, which i posted in the other bug report as well.
1 Like
No problem and logged in the other topic.
1 Like
Thank you so much! I’ll close this one down as a duplicate, in favor of:
Bug Description
When General → Recording Options is set to Only Notes the OFF message is not placed when releasing the pads (or only sometimes). This causes follow up notes to be placed in the next adjacent columns.
This affects all the instrument types (Samples, Synths & MIDI)
Correct behaviour would be that when you release a pad, that OFF message is placed.
Workaround for now:
You can circumvent this behaviour by enabling Microtiming.
Then the OFF messages are place…
Sandroid
Closed
September 29, 2024, 6:00am
7
This topic was automatically closed after 8 hours. New replies are no longer allowed.