Help with MIDI between Tracker+ and Play+

Hie everybody,

I would need your help because I want to connect my tracker + and my polyend play.

I want the tracker to be the master.

I don’t know how I did it but it worked only once but then impossible to synchronize them again.

Here are the settings:


out for the tracker and one for the play.

On the other hand, I didn’t hear any sound from the play.

Hey there @TAZ, at a minimum, you need the following MIDI settings on the Play:

Let me know if that helped. :v:

1 Like

Hello,

thank you for your feedback.
I’ll try this this evening when I get home and let you know if it worked.

Thank you for the help it works.

However, I can’t hear the sounds of the play.

Do I have to take the one out of the audio to the tracker?

1 Like

If you are sending the audio from the Play+ to the Tracker+ Line-In, you have to make sure that the Line-In Volume is not muted or turned off.

  • Press the Master Button until you reach the Global Mixer 3/3 page.
  • Check the Line In Volume/Mute
1 Like

Thank you ! :pray:

1 Like