DISCLAIMER:
All community-created firmwares and modifications are provided “AS IS” without official warranty, support, or maintenance from Polyend. Installing and running custom builds is done entirely at your own risk. To the maximum extent permitted by applicable law, Polyend disclaims all liability for data loss, device malfunction, or hardware damage resulting from custom firmware.
Use at your own discretion and enjoy exploring the creativity of our talented community!
[https://github.com/trak3r-os/track3r-os](https://github.com/trak3r-os/track3r-os)
**Target hardware:** the original Tracker. Tracker+ and Tracker Mini are not tested.
**Changes since 1.0.1**
- A SID-style instrument, built in: saw, triangle, pulse with PWM, noise and combined waves, sync and ring, a stepped ADSR, and a filter with a 6581 or 8580 model switch.
- Stereo samples, opt-in per instrument; up to four stereo voices at once.
- USB audio outputs of 2, 4, 6, 8 or 10 channels, chosen per project on Mixer, STEMS.
- Song: new STAGE and TIMELINE pages, and FORM and BRIDGE in the TOOLS dialog.
- Import of module files by their header, and of 15-sample Soundtracker MODs.
- Step effects 23, 24, 33 and 36 start their LFO.
- The Update screen can pad an older image after asking, which avoids a boot crash on images that do not end on a flash sector.
- Reversed voices (PLAYBACK, effect 26) are cheaper: six of them cost +0.23 percentage points of CPU on the unit, against +6.19 before.
- Fixes, among them the overdrive and bit depth of module instruments (TB-303, FM, Chip; issue #2).
**Source and downloads**
- Source, releases and issue tracker: [https://github.com/trak3r-os/track3r-os](https://github.com/trak3r-os/track3r-os)
- Download track3r-os-v1.1.0.ptf and SHA256SUMS from the latest release: [https://github.com/trak3r-os/track3r-os/releases/latest](https://github.com/trak3r-os/track3r-os/releases/latest)
- Check the download with sha256sum -c SHA256SUMS.
- Installing from track3r-os 1.0.x: copy the .ptf file into Firmware/ on the SD card, open Config, INFO and press F8 (UPDATE).
- Installing from the official firmware: copy the .ptf file into Firmware/ and rename the copy to PolyendTracker_0.0.1.ptf. It must be the only .ptf file there. Then use the hidden reset button, as the installing guide in docs/manual/install.md describes. Afterwards, Config, INFO should show BUILD ID v1.1.0.
- Going back to 1.0.x: use PAD on the Update screen. It writes a padded copy and leaves your file alone.
- Back up your SD card and keep a copy of the official firmware file before you install. Installing replaces the firmware on your unit.
**Known issues**
- Swapping the SD card can crash the unit. Switch the unit off before you change the card.
- Very heavy projects can exceed the CPU budget. Some Perform effects cost CPU while held.
- USB audio outputs are not checked on macOS or Windows.
**Feedback**
Please report bugs as GitHub issues, with the BUILD ID from Config, INFO and the steps to reproduce. Feature ideas are welcome there too.