It is apparently possible to corrupt the /workspace folder or some of its content.
This was initially reported by @cjclip here:
[IMG_2864.HEIC]
One day, I simply turned on the synthesizer, and it wouldn’t start and it gets stuck on the loading screen, with the power button becoming unresponsive.
Any ideas on how to fix this?
I tried performing a hard reset (holding the reset button and the power button), and a recovery procedure was initiated, but it didn’t help either.
As I noticed, this error started occurring frequently after I uploaded my own samples into the Grain synthesizer or used patches created from my sam…
Remove the sd card and delete the /workspace folder
Insert the card into the device again and start
The system will create a fresh /workspace for you
Turn off the device and remove the sd card
Replace the /workspace folder on the card with the one provided in the attachment
Insert the sd card and turn on the device
The device will hang on boot
Always (with the provided workspace)
Version : 1.0.1 Build : 1459
workspace.zip (6.5 KB)
1 Like
I can confirm this is reproducable with the attached workspace.
@cjclip do you remember what the last things were, that you may have done/changed in this project?
1 Like
cjclip
November 28, 2024, 8:16pm
3
Yes, this issue occurs after I leave custom Grain synthesizers created from my own samples and patches in the last working scene. That’s where the problem lies.
1 Like
cjclip
November 28, 2024, 8:17pm
4
You might try creating your own patches using your samples in the Grain synthesizer, and most likely, after turning it off and on, the synthesizer will not start.
Oh hang on… this makes me think of something…
is it possible that you may have deleted samples from the SD card for the GRAIN, but not changed it within the GRAIN parameter itself?
i’ve created a multiple grain patches before without issues, hence why i’m asking if you maybe moved/deleted samples for your grain patches?
Caution: this will delete any unsaved progress you may have had.