# Parameter knobs unresponsive

**URL:** <https://backstage.polyend.com/t/parameter-knobs-unresponsive/18441>\
**Category:** Synth\
**Created:** [February 4, 2025, 11:30am UTC](https://backstage.polyend.com/t/parameter-knobs-unresponsive/18441 "2025-02-04T11:30:09Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![mikeyboy93](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/m/13edae/32.png) [@mikeyboy93](https://backstage.polyend.com/u/mikeyboy93)\
**Post date:** [February 4, 2025, 11:30am UTC](https://backstage.polyend.com/t/parameter-knobs-unresponsive/18441/1 "2025-02-04T11:30:09Z")

</div>

Hi all,  
Need a bit of Help. Only had my Polyend synth a week or two, but I’ve come upon a problem with the parameter knobs that keep sticking.  
I’m having difficulty adjusting filters and other parameters et cetera using the nine parameter Knobs.  
Some of them are just one way and not the other some just won’t even move any parameters.

Anybody having the same problems?  
Anybody got any solutions?  
Mike D

---

<div class="post-metadata">

**Author:** ![Dann](https://backstage.polyend.com/user_avatar/backstage.polyend.com/dann/32/2287_2.png) [@Dann](https://backstage.polyend.com/u/Dann)\
**Post date:** [February 4, 2025, 3:25pm UTC](https://backstage.polyend.com/t/parameter-knobs-unresponsive/18441/2 "2025-02-04T15:25:50Z")

</div>

Hey there @mikeyboy93, welcome to Backstage. Happy to have you here 🙂

This has come up before, although not as extreme as your case. Can you take a look at the link below and see if that helps?

> [@Inconsistent Play+ knobs](https://backstage.polyend.com/t/inconsistent-play-knobs/6891/7):
>
> @here We encountered a similar behavior with the OG Play in the past. There may be two causes of such behavior. There may be some dirt that got into the encoders, causing that they randomly activate, and/or change values. - I’d suggest to give all the faulty encoders some spinning slight_smile Just turn them a lot for a few minutes. The encoders may be touching the “chassis”. Please, try to move them “by force” up/down/left/right as if trying to move them away from touching the edges of the…

---

<div class="post-metadata">

**Author:** ![Mitch](https://backstage.polyend.com/user_avatar/backstage.polyend.com/mitch/32/33_2.png) [@Mitch](https://backstage.polyend.com/u/Mitch)\
**Post date:** [February 4, 2025, 3:36pm UTC](https://backstage.polyend.com/t/parameter-knobs-unresponsive/18441/3 "2025-02-04T15:36:34Z")

</div>

Hi Mike,

Sorry you are having trouble - one thing I’ve come across is if I have a cable laying across a knob, it will register as being touched and throw things off.

Also are you using the factory power supply? If not try plugging that directly into a power source, and not a computer or other USB device to see if you continue having the issue. If you continue to experience this issue, please send a video to [support@polyend.com](mailto:support@polyend.com)

---

<div class="post-metadata">

**Author:** ![mikeyboy93](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/m/13edae/32.png) [@mikeyboy93](https://backstage.polyend.com/u/mikeyboy93)\
**Post date:** [February 5, 2025, 10:12am UTC](https://backstage.polyend.com/t/parameter-knobs-unresponsive/18441/4 "2025-02-05T10:12:31Z")

</div>

Hi Mitch  
I think it might be a software problem because it’s not continuous over all the patches only certain ones.  
It’s as if the software can’t keep up with the knobs turning.  
I’ve tried using a power supply away from my Mac and it made no difference to the problem

---

<div class="post-metadata">

**Author:** ![maurimongio](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@maurimongio](https://backstage.polyend.com/u/maurimongio)\
**Post date:** [March 12, 2025, 4:08pm UTC](https://backstage.polyend.com/t/parameter-knobs-unresponsive/18441/5 "2025-03-12T16:08:04Z")

</div>

also happening here, sometimes when the synth is too busy (with heavy algorythms, playing notes and turning more knobs at the same time) the knob turning lags.
