Midi Connection Troubles

I recently purchased a Polyend Tracker+ to add some drum machine and midi record/playback capabilities to a setup I have with a Moog Grandmother and an ASM Hydrasynth. I was previously using a Novation Circuit Tracks in this place, but I never really jelled with the experience.

I’m also using WiDi Master connections to facilitate bi-directional communication between all devices. I have my Tracker set up as the master, with the 2 synths as periphrials. The issue I am seeing is that when the Tracker is powered on, one synth (generally the last one I turned on) is playing both a note of itself and a note of the other synth when I press a key on it’s keyboard. I believe the Tracker is somehow echoing the midi signal, but I am unsure how it’s echoing it onto a different channel. The Moog is set to Channel 1, and the ASM is Channel 2. As these more complex setups are new to me, any help you can provide would be great. Thanks!

Hey @cstimko, welcome to Backstage! :party:

Let’s see if we can figure this out together.

Are you entering notes from a keyboard to the Tracker? Or are you sequencing directly on the Tracker?

And out of curiousity. If you just place a single note on an empty pattern. For example MIDI Instrument 1 (which always send to only MIDI Channel 1). What happens?

I would like to play on my synths, and have the Tracker record the midi input. Then, play it back out into the synths along with the drum loops I’ve currently got on the Tracker. I’m actually a guitar player, so I’m attempting to use the synths and the Tracker to create drums, bass, and chord progressions that I can construct guitar parts over.

At the moment, I can send midi out from the tracker playing a single note on an empty patter using the Tracker keyboard, and only that synth players. This happens both for synth 1 and 2. The problem only occurs when I’m playing from the keyboard of synth 2 (which takes the longest to power on, so it’s the last one to activate). The problem also goes away if 1.) the Tracker is turned off or 2.) the Midi IN on the Tracker in the config is set to OFF. The issue with #2 is that it also disables the ability for the Tracker to record midi input, which defeats the situation I’m trying to solve.

Thanks for the response!

It sounds to me like you might be ending up in a MIDI loopback.

Let’s assume that Synth listens to incoming MIDI only on Channel 2 .

  • What you could do is set the Notes in channel on the Tracker for example to channel 16.
  • On the Synth you want to use, make sure that outgoing MIDI is channel 16
  • Then use the MIDI Channel 2 instrument to send notes to that Synth

The one issue you might face, is that the synth might pass the incoming midi back out. There might be a setting to prevent that. What synth are we talking about here?

Sorry for the belated response. But here’s what I have set up currently.

Tracker:

  • Clock In: Internal
  • Clock Out: Midi Out
  • Transport In: Internal
  • Transport Out: Off
  • Notes In: Midi In
  • Notes In Channel: 16
  • Midi Out: Midi Out
  • CC In: Midi In
  • CC In Channel: 16

Moog Grandmother (Synth 1):

  • Midi Out: Channel 16
  • Midi In: Channel 1

ASM Hydrasynth (Synth 2):

  • Midi TX: 16
  • Midi RX: 2

I can play each synth independently using the keyboard on the Tracker. I can sequence midi output on the Tracker, and it plays each synth independently. However, when both synths are on as well as the Tracker, playing the keyboard of the first synth I turned plays itself and the 2nd synth. This does not happen when the Tracker is off.

I hope this gives a clearer picture of what I’m encountering! The use of CH16 as the single output channel seems to have fixed some issues but not all.

Check if your Moog Grandmother has an option to turn MIDI Local OFF, that should solve the issue.

EDIT: It’s apparently called “Local Control”.

When you press the keys on your Grandmother, it obviously wants to play the sounds directly on the device. And if your active instrument on the Tracker is MIDI Channel 2, then it will also play the Hydrasynth, because you sent a signal out via MIDI as well.

When you turn OFF Local Control on the Moog, it should not play a sound when you press the keys, but still send MIDI out and still react to incoming MIDI.

Which means (on the Tracker):

  • if you want to hear the Hydrasynth, you change the active instrument to MIDI Channel 2.
  • If you want to hear the Moog again, you switch the active Instrument to MIDI Channel 1.

Hope that makes sense :blush: