# exFAT Support for Polyend devices

**URL:** <https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685>\
**Category:** Archive\
**Tags:** play-plus, tracker, mini, declined, play\
**Created:** [March 11, 2024, 10:32am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685 "2024-03-11T10:32:33Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![alexandrosroussos](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/a/f475e1/32.png) [@alexandrosroussos](https://backstage.polyend.com/u/alexandrosroussos)\
**Post date:** [March 11, 2024, 10:32am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/1 "2024-03-11T10:32:33Z")

</div>

This is a request for any Polyend product that does only support FAT32 partitions.  
It basically asks for exFAT file system support for any of the devices that could possibly support this.

### What is the problem?

While there is no real benefit between exFAT and FAT32 (unless you want to write files larger than 4Gbyte), there is a usability benefit for users, when switching to eXFAT. Especially when using larger SD cards (64GB or more). Formatting a new SD isn’t as straight forward as it used to be on Microsoft Windows in those cases, as FAT32 is not an option anymore for larger cards (this is a change introduced in Windows 10).

Large FAT32 volumes may take ages and sometimes never mount on modern macOS based systems. If you search on the Internet, you’ll find several reports about that. There are also reports of file systems requiring repair after being used on macOS, something that doesn’t happen (or at least not as often) with cards & flash drive commonly used exFAT file system type.

The concern is, that Microsoft most likely will remove formatting support for FAT32 at some point, or at the very least make in inaccessible for regular users, that may not have the skills to dive into command lines or shells. Or at the very least they won’t fix any issues/provide any support. Apple could also do the same, sooner rather than later.

### What do you want to achieve?

Add ability to use exFAT formatted SD cards on Tracker, Tracker mini, Play and Play+ with full support from Polyend. Or atleast on the devices that could support exFAT.

exFAT is royal-tea free since 2019, which should remove another barrier for Polyend to adopt it.

### Are there any workarounds?

Use smaller cards and/or exclusively use a PC with Win 10-11 for file transferring (until Microsoft itself ends support).

### Any links to related discussions?

> [@Do Polyend Tracker OG/Mini support ExFAT formated SD cards?](https://backstage.polyend.com/t/do-polyend-tracker-og-mini-support-exfat-formated-sd-cards/4821):
>
> When looking at the forums/web, I see mention that the SD card for the Tracker has to be formatted in FAT32 so as to work with the Polyend Tracker, no much info about the mini right now as it’s pretty new. Is it still true with recent firmware of the OG Tracker and with the Tracker mini ? Or can I use ExFAT or other file system types ? I’m planning to use is a 400GB SanDisk Ultra U1/A1.

> [@"Insert SD Card"](https://backstage.polyend.com/t/insert-sd-card/2390/5):
>
> I’m using Win 10 machine. So… At first I did format the original SD card using the default Windows tool. When that didn’t work I tried different SD card which is like 238GB card and for some reason default Windows formatting tool would only let me to format it to exFAT or NTFS. I downloaded Guiformat application which was able to do the work. I also tried using the same tool to format the original SD card, but that didn’t do the trick. I remember I already had a similar problem when was doin…

> [@What capacity SD cards can be used with Polyend Play and what's the file partition format used?](https://backstage.polyend.com/t/what-capacity-sd-cards-can-be-used-with-polyend-play-and-whats-the-file-partition-format-used/221):
>
> The SD card needs to be formatted to the primary FAT32 (or exFAT) MBR partition type. Polyend Play is offered with a 16 GB microSD card, larger SD cards can also be used as long as they are correctly formatted. We recommend UHS-I cards, particularly ones that are rated A1 or A2. The built-in disk-utility under Mac OS will allow you to select FAT32 for formatting.

> [@What capacity SD cards can be used and what's the file partition format used?](https://backstage.polyend.com/t/what-capacity-sd-cards-can-be-used-and-whats-the-file-partition-format-used/277):
>
> The SD card needs to be formatted to the primary FAT32 MBR partition type. Polyend Tracker is offered with a 16 GB microSD card, larger SD cards can also be used as long as they are correctly formatted (The built-in disk-utility under Mac OS will allow you to select FAT32 for formatting). We recommend UHS-I cards / U3 cards.

### Any references to other products?

Pretty much every other groovebox / synth / drum box product of any brand nowadays.

---

<div class="post-metadata">

**Author:** ![Mex](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/m/4da419/32.png) [@Mex](https://backstage.polyend.com/u/Mex)\
**Post date:** [March 11, 2024, 10:55am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/2 "2024-03-11T10:55:40Z")

</div>

This could also explain some of the weird behaviour the Tracker sometimes shows? Maybe… I don’t know. ☺

I mean the whole thing is running from that SD-card, right?

---

<div class="post-metadata">

**Author:** ![alexandrosroussos](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/a/f475e1/32.png) [@alexandrosroussos](https://backstage.polyend.com/u/alexandrosroussos)\
**Post date:** [March 11, 2024, 11:23am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/3 "2024-03-11T11:23:45Z")

</div>

I don’t know if the Tracker/Play writes the firmware into an internal mmc storage/RAM or if it runs it directly from the sd.

However I believe if you encounter any of the issues with the Mac kinda corrupting the file system (triggering file system repair notices when back on Windows), that “unrepaired” state could also be problematic for the Tracker/Play.

---

<div class="post-metadata">

**Author:** ![Sandroid](https://backstage.polyend.com/user_avatar/backstage.polyend.com/sandroid/32/172_2.png) [@Sandroid](https://backstage.polyend.com/u/Sandroid)\
**Post date:** [March 11, 2024, 11:23am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/4 "2024-03-11T11:23:48Z")

</div>

> [@Mex](#):
>
> This could also explain some of the weird behaviour the Tracker sometimes shows? Maybe… I don’t know. ☺

I think most everything runs from RAM. The SD is purely reading/writing project data when needed. But i’m also just guessing, so don’t take my word for it 😆 .

---

<div class="post-metadata">

**Author:** ![Sandroid](https://backstage.polyend.com/user_avatar/backstage.polyend.com/sandroid/32/172_2.png) [@Sandroid](https://backstage.polyend.com/u/Sandroid)\
**Post date:** [March 11, 2024, 11:25am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/5 "2024-03-11T11:25:14Z")

</div>

I think this is a very fair ask, especially since Windows since version 10, makes it increasingly difficult to format larger cards with FAT32.

Thanks for the wish!

---

<div class="post-metadata">

**Author:** ![Sandroid](https://backstage.polyend.com/user_avatar/backstage.polyend.com/sandroid/32/172_2.png) [@Sandroid](https://backstage.polyend.com/u/Sandroid)\
**Post date:** [March 11, 2024, 11:30am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/6 "2024-03-11T11:30:02Z")

</div>

Small aside here though.

It is very likely that the OG Tracker and original Play may not be able to support anything else but FAT32, based on the hardware. But from my limited understanding i think the Mini and Play+, which use a new MCU/Platform, could possibly support exFAT.

---

<div class="post-metadata">

**Author:** ![alexandrosroussos](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/a/f475e1/32.png) [@alexandrosroussos](https://backstage.polyend.com/u/alexandrosroussos)\
**Post date:** [March 11, 2024, 11:36am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/7 "2024-03-11T11:36:41Z")

</div>

> Small aside here though.
> 
> It is very likely that the OG Tracker and original Play may not be able to support anything else but FAT32, based on the hardware. But from my limited understanding i think the Mini and Play+, which use a new MCU/Platform, could possibly support exFAT.

Thank you @Sandroid for this. I was also wondering on the actual feasibility.

Probably FAT32 will still need to remain supported for those who use both og Tracker/Play and Mini/Play+ released later in their setup.

Support for exFAT will be very convenient for those (like me) who started and will start their Polyend journey will the mini or +.

I hope Polyend can make this happen at least on the newer units.

---

<div class="post-metadata">

**Author:** ![DJ\_Tom\_Rolla](https://backstage.polyend.com/user_avatar/backstage.polyend.com/dj_tom_rolla/32/6394_2.png) [@DJ\_Tom\_Rolla](https://backstage.polyend.com/u/DJ_Tom_Rolla)\
**Post date:** [March 11, 2024, 11:47am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/8 "2024-03-11T11:47:42Z")

</div>

SanDisk Ultra 256 Gig Card user here. I had to take my Micro SD into work and use the Studios Mac to format the little cutie. The SD Card works like a charm.

---

<div class="post-metadata">

**Author:** ![Sandroid](https://backstage.polyend.com/user_avatar/backstage.polyend.com/sandroid/32/172_2.png) [@Sandroid](https://backstage.polyend.com/u/Sandroid)\
**Post date:** [March 11, 2024, 11:54am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/9 "2024-03-11T11:54:32Z")

</div>

I’ve taken the liberty to update the wish content, to remove any first person language that may have been present (according to our guidelines).

I hope that’s ok 😊

---

<div class="post-metadata">

**Author:** ![alexandrosroussos](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/a/f475e1/32.png) [@alexandrosroussos](https://backstage.polyend.com/u/alexandrosroussos)\
**Post date:** [March 11, 2024, 12:07pm UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/11 "2024-03-11T12:07:14Z")

</div>

> I’ve taken the liberty to update the wish content, to remove any first person language that may have been present (according to our guidelines).

Sure that’s fine. Thanks @Sandroid

---

<div class="post-metadata">

**Author:** ![Mex](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/m/4da419/32.png) [@Mex](https://backstage.polyend.com/u/Mex)\
**Post date:** [March 11, 2024, 7:33pm UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/12 "2024-03-11T19:33:14Z")

</div>

Hmmm, I don’t know… if you turn the Tracker on without the SD-card, it asks you to put one in. So without anything in that slot pretty much nothing is going to happen. But of course I also don’t know. 😇

---

<div class="post-metadata">

**Author:** ![alexandrosroussos](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/a/f475e1/32.png) [@alexandrosroussos](https://backstage.polyend.com/u/alexandrosroussos)\
**Post date:** [March 11, 2024, 7:45pm UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/13 "2024-03-11T19:45:19Z")

</div>

> Hmmm, I don’t know… if you turn the Tracker on without the SD-card, it asks you to put one in. So without anything in that slot pretty much nothing is going to happen. But of course I also don’t know. 😇

I guess it reads the firmware from the sd and loads it into memory during startup. But the actual devs will know better than us 🙂

---

<div class="post-metadata">

**Author:** ![Sandroid](https://backstage.polyend.com/user_avatar/backstage.polyend.com/sandroid/32/172_2.png) [@Sandroid](https://backstage.polyend.com/u/Sandroid)\
**Post date:** [March 11, 2024, 10:18pm UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/14 "2024-03-11T22:18:30Z")

</div>

> [@alexandrosroussos](#):
>
> I guess it reads the firmware from the sd and loads it into memory during startup. But the actual devs will know better than us 🙂

actually… 😊

the reason it asks for a SD card has to do with how the software works. It tries to load the last open project/state (from a specific folder on the card). That’s why it’s asking for the card.

The firmware is written to ROM and/or flash memory during an update. So effectively you don’t need to have those files on the card anymore once the update is done.

---

<div class="post-metadata">

**Author:** ![Mex](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/m/4da419/32.png) [@Mex](https://backstage.polyend.com/u/Mex)\
**Post date:** [March 12, 2024, 6:35am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/15 "2024-03-12T06:35:56Z")

</div>

Ah, okay! Interesting. I will try that.

---

<div class="post-metadata">

**Author:** ![Mex](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/m/4da419/32.png) [@Mex](https://backstage.polyend.com/u/Mex)\
**Post date:** [March 12, 2024, 8:53am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/16 "2024-03-12T08:53:09Z")

</div>

I took out the card after loading a project. It asks immediately to put it back, so I guess that means it runs all the samples (etc. ?) from the card and does not pull them into the RAM?

---

<div class="post-metadata">

**Author:** ![Sandroid](https://backstage.polyend.com/user_avatar/backstage.polyend.com/sandroid/32/172_2.png) [@Sandroid](https://backstage.polyend.com/u/Sandroid)\
**Post date:** [March 12, 2024, 11:17am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/17 "2024-03-12T11:17:42Z")

</div>

Samples are loaded into RAM and not streamed from card.

The Tracker constantly stores the current state to the card, even if the open project has never been saved before. That’s why it always wants a card present.

Every single action you take, will be stored to the hidden `Workspace` folder present on the SD card.

It’s actually a very useful feature that prevents you from loosing what you are working on, in case of an unexpected crash 😊

---

<div class="post-metadata">

**Author:** ![Mex](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/m/4da419/32.png) [@Mex](https://backstage.polyend.com/u/Mex)\
**Post date:** [March 12, 2024, 12:29pm UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/18 "2024-03-12T12:29:43Z")

</div>

Absolutely! 🕶  
Makes sense…  
Thanks for clarification.

---

<div class="post-metadata">

**Author:** ![surrealchemist](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/s/c6cbf5/32.png) [@surrealchemist](https://backstage.polyend.com/u/surrealchemist)\
**Post date:** [March 14, 2024, 7:37pm UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/19 "2024-03-14T19:37:42Z")

</div>

I don’t know if this has ever been shared, but some piece of gear I had at one point they suggested using the official SD Foundation formatter. I find it eliminates some of the guess work, and for users that don’t know how to navigate the built in OS drive management tools makes things a bit easier. I can’t recall if it defaults to exFAT for drives over a certain size or not though. [SD Memory Card Formatter for Windows/Mac | SD Association](https://www.sdcard.org/downloads/formatter/)

---

<div class="post-metadata">

**Author:** ![alexandrosroussos](https://backstage.polyend.com/letter_avatar_proxy/v4/letter/a/f475e1/32.png) [@alexandrosroussos](https://backstage.polyend.com/u/alexandrosroussos)\
**Post date:** [March 14, 2024, 11:19pm UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/20 "2024-03-14T23:19:52Z")

</div>

> I don’t know if this has ever been shared, but some piece of gear I had at one point they suggested using the official SD Foundation formatter. I find it eliminates some of the guess work, and for users that don’t know how to navigate the built in OS drive management tools makes things a bit easier. I can’t recall if it defaults to exFAT for drives over a certain size or not though. [SD Memory Card Formatter for Windows/Mac | SD Association](https://www.sdcard.org/downloads/formatter/)

@surrealchemist It’s going to format in exFAT so currently not supported.

---

<div class="post-metadata">

**Author:** ![borsuk](https://backstage.polyend.com/user_avatar/backstage.polyend.com/borsuk/32/582_2.png) [@borsuk](https://backstage.polyend.com/u/borsuk)\
**Post date:** [March 19, 2024, 8:47am UTC](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685/21 "2024-03-19T08:47:57Z")

</div>

@here Thanks for your contribution. Unfortunately, we have to decline your wish because of technical limitations.

[Next page](https://backstage.polyend.com/t/exfat-support-for-polyend-devices/9685.md?page=2)
