MIDI NEWBIE
I’m trying to midi control/sequence my PWM MALEVOLENT (midi in) with my POLYEND TRACKER PLUS (midi out)
Im using a midi cable not usb
I put the instrument on midi channel 1
could someone tell me what the midi config menu should read as in each section so i can sequence my SYNTH with my TRACKER PLUS:
CLOCK IN:?
CLOCK OUT:?
TRANSPORT IN:?
TRANSPORT OUT:?
NOTES IN:?
NOTES IN CHANNEL:?
MIDI OUT:?
CC IN:?
CC IN CHANNEL:?
MIDDLE C: ?
CLOCK SYNC CORRECTION:?
ANY TIPS ON HOW TO START A MIDI SEQUENCE ARE WELCOME
If you want to control an external synth on channel 1, your config menu should look like this
Clock in: Internal
Clock out: MIDI out jack
Transport in: Internal
Transport out: Midi out jack
Notes in: Off
Notes in channel: (any)
MIDI out: MIDI out jack
CC in: Off
CC in channel: (any)
Middle C: C-3 (default)
Clock sync correction: 0
How you sequence a synth on channel 1 is by selecting MIDI Channel 1 from your instruments list. They’ll be down at the bottom (instruments 51-66). Once you have the midi channel selected from there, its ready to send note and velocity data to your external synth. There is also a variety of CC’s you can send by setting them to your macros (CC A, CC B, etc.), so if you have a midi CC list for your external synths, you can set those up from the Instruments Parameters menu. That should be the gist of it. Hope this helps!
3 Likes
I appreciate the help, it wasn’t working and now it is.
2 Likes